Thursday, 29 December 2011

How to replace the speedo support cowling plastic on a Ducati 916

The light bulbs from neutral and low fuel had burnt the plastic cowling and when the neutral light was on it bleed into the low fuel warning light display. So I bought a new part 40740011A speedometer support from Mick. Below are the pictures and the steps needed to replace the speedo plastic cowling.
The most important information for me was finding that I needed a small screwdriver to undo the reset switch on the speedo. This was needed to remove the speedo from the cowling so it could be replaced.

The parts needed
A small positive screwdriver to undo the speedo reset
Clocks apart with the 4 8mm nuts taken off
Headlamp removed
Mirrors removed
Fairing zeus clips removed off top part of fairing
Picture of the clocks
Close up of the part to be removed.

No comments: